And I WROTE the damn thing

Back in 2007, I wrote a blog post about a sweater that I put together based on one that a TV character was wearing.  In case you missed it, here's the link.  I ended up making 2 sweaters using the natural white Fisherman's Brand Wool from Lion Brand.  I love the pattern and, in fact, I wore one of them on Sunday when I was shoveling snow and never felt a bit of cold.  I love it.

Last year I bought a beautiful Valley Yarns burgundy wool for a project that I later decided not to make.  I thought it would be perfect for a new jumper and I knew just which pattern I wanted to use - the pretty man sweater.

One thing to keep in mind that this is a pattern that I wrote and have made twice.  That will be important later.

I downloaded the pattern and made an adjustment right away.  The fisherman's rib, or brioche stitch, is a very stretchy stitch.  It's effectively a double knit stitch and has a huge amount of give to it.  In my pattern, I didn't use any sort of rib on it but then I had issues with the cast on being too rigid.  This time I decided to start with a provisional cast on that will allow the garment to stretch to its heart's content before I go back and add whatever I'm going to add for the bottom edge.  That should give it a better edge.

All's good, I got it started and knit to the armhole shaping.  This particular pattern has raglan sleeves outlined by a simple cable.  As I started this shaping THE FIRST TIME, I goofed and decided to add the decreases on the wrong side since I was doing the cables on the right side.  It wasn't until I'd got through the 3rd cable crossing (18 rows in) that I realized that doing the decrease on the wrong side was the wrong thing.  All the nice stitches was on the inside with the decreases.  The outside didn't look terrible but it wasn't right.  So I ripped it out to the beginning of the cabling.  Not a terribly easy thing with this stitch but I did it because it was the right thing to do.

OK.  Got it ripped out and back on the needles and started off again.  I got to the 5th (30 rows in0 cable twist when I realized it wasn't shaping right.  It has narrowed too quickly and I was running out of stitches.  This happened last night when I had sat down to knit 2 simple rows before I went to bed.  It was late.  I realized I hadn't paid attention to the pattern.  I got cocky and didn't look at the pattern.
So I pulled it up and, sure enough, I was supposed to decrease every 4th row, not every 2nd row. Even I know that will make a difference. My question is, how could I have not known this?  How did I not even look at the pattern?  I wrote the damn thing!

The Easiest Part is Sometimes the Longest

One day I'm going to write an article about the slowest part of spinning. HINT: it's the plying. 

When you're spinning fiber into yarn, there's a lot going on. Just ask a brand new spinner. Sure you've only got 2 hands (for holding and drafting the fiber) and 2 feet (for treadling the wheel) but it feels like you need 40 of each - not to mention a few extra eyes and a couple of brains to keep track of everything. It can definitely be overwhelming. 

That's why, when in working with a new spinner, I have then break down all the things that need to happen into stand alone tasks. 

1.  Pre draft the fiber. It helps them get a feel for how the fiber acts as well as taking away one of the spinning tasks. 

2.  Hold the fiber and treadle until you feel the twist in the forward hand. 

3.  Stop treadling and draw the hands back to let the twist run in. 

That's a lot to take in and do all at the same time. But it can be learned. 

By contrast, to ply 2 of those singles together only requires the spinner to treadle and let the the twist run in. Of course, you do have to remember to move the yarn forward on the bobbin but it should be easy and fast - much faster than drafting fiber. 

And it is easier but it's by no means faster. For the first years of my spinning life, I produced under plied yarns. I still have yarns that are woefully under plied. (I keep meaning to run them back through the wheel). 

The reason is simple psychology. You think that because it's easier, it should be faster. That ain't always the case, mon amis. 

Ah, you say, but I can always use a faster whorl. Get the twist in faster, move things along. Yes, I say, you can do that but then you change the character of the yarn you're spinning. There may be times you want to use a whorl that's a different size but it should be done on purpose and with a reason. 

If you don't believe me, go experiment. Using a generic light colored wool, spin 2 singles with your chosen whorl and make it long enough for several samples. Keep a sample of the singles yarn long enough to have a "before washing" and "after washing."

Now, regardless of the size whorl you spun the singles on, use your largest whorl and spin a sample long enough for a before/after.  Now do a sample with your next size down and so on until you've used all your whorls and have your 2 sets of samples. 

Keep track of which is which - loop the unwashed samples on a piece of cardboard and note which is which. 

Wash the other set and let them air dry then loop them next to their unwashed counterpart. Look closely at the subtle differences. You could even do this twice, one with a worsted style drafting and also with a woolen style. You could expand it further to repeat the experiment by spinning singles with each of the whorls and seeing what difference the various singles make. 

Yes, the differences in the small samples may appear subtle but it's the same principle as the gauge swatch in knitting. It may call for 5 stitches to the inch but if you are 1/2 stitch over in your gauge, once you multiply it out, it adds up to a big difference. The same for your spinning swatch. Over a project, it can make a big difference. 

When you're spinning, always keep in mind that singles need more twist than you might think because you will lose some of it when you ply. When you're plying, you need more twist than you might think because you'll lose some when you wash your project. 

The point of all this, really, is be patient in your plying. Be present and you'll get the most out of the experience and you'll get the yarn you really want. 

How many licks…

Remember that old commercial about the owl trying to figure out how many licks on the tootsie pop before you get to the chewy center?  That's how I feel with this spinning project.

I've had this project on my Kromski Symphony for about 3 years. 

I love all my spinning wheels but this one is the most elegant and the best at spinning the lace weight yarn. 

The fiber is a Cormo/Suri Alpaca blend that I found at Knitorious and it's kind of a denim color. So pretty and super soft and silky. 

As you can see, my bobbin is full and I only have a short strip to go to finish this half of the fiber. Just the second half to go!  The first half took 3 years, wonder how long the second half will go. 

Keep in mind that this bobbin has about 2 ounces of fiber spun super fine which is probably about 1200 yards of singles. 

Or more. 

So happy to make some progress with this thing. 

Delicate wee thing

Finished!  I can't tell you how pleased I am with this delicate wee thing. I will definitely be working this design again. The previous exercise prepared me for this one and I could tell that my spidering skills have improved. Never thought I'd say that and be happy…

Making progress

I've almost finished the latest bobbin lace project in my Torchon workbook. I've really enjoyed this little 4" (20cm) wide doily. Now I just have to finish it off without screwing it up!

52" of Pretty

It's done. My first table runner made with 10/2 perle cotton using an overshot threading and a 2/2 twill treadling. 

Sounds like I know what I'm talking about, doesn't it?!  Ha!!  Fake it till you make it, baby!

Endings and Beginnings

I spent much of the weekend finishing (or almost finishing projects. One of the most interesting was finishing the fractal scarf. 

A few weeks ago I started an experiment with fractal spinning (http://www.knitnmore.blogspot.com/2015/11/spinning-fractally.html?m=1). I finally finished the fractal scarf and now you can see the effects of the spinning technique on the finished project. I'm loving it. 

Can you see how the frequency and patter of the stripes changes?  This photo makes it look like the scarf is fuzzy but the mats just the way the plying blended the colors. Interesting, no?

I also finished my spider-studied bobbin lace project. As expected, there are lots of errors but that's fine. 

Now that I have a feel for things, I can make it again and go for a usable piece. I had a lot of fun with it and the magic threads I used to start worked perfectly so that was a win. 

I've got the next project started but don't have all the bobbins worked in yet. More on that when I get it a little further on. 

Since I'd finished or got projects to a point that I would have to think too hard, I turned last night to a weaving project I've had in the loom since the Robin Spady workshop in the spring. I had a really long warp on the table loom and after I'd done the workshop and a couple of other projects, I decided to do a table runner using the overshot warp with a twill weft using the same thread. I don't always get these things right with weaving but I think I nailed this one. 

I only have about 8 inches more of usable warp left which will be about an hour's worth of work so I should be able to get it off the loom tonight. I love the pattern made by mixing the warp and weft styles.   

I'm not sure how long it will be but it should be at least 40-50 inches (I'm guessing since I didn't keep track). I'll have to see if some of the early part will need to be cut off. We'll know more tonight.